ISE Moderno FHC3010 J Shape, Filtered Hot & Cold Side Tap

ISE Moderno FHC3010 J Shape, Filtered Hot & Cold Side Tap

FHC3010 Specification Sheet

neotank-specification-sheet-en-gb-4998070

Only genuine InSinkErator® filters will ensure your warranty is valid. Replacing your filter every 6 months* will assure optimum performance of your InSinkErator® hot water tank by reducing the limescale and calcium build-up inside your hot water system. The filter also improves the taste of water by significantly reducing chlorine and other impurities in your tap water.

* The filter cartridge must be replaced every 6 months at the rated capacity (454 litres), or sooner if a noticeable reduction in flow rate occurs.

–

 Features

• Hot and cold water faucet – dispenses near-boiling water and cold drinking water
• Self-closing hot valve for automatic shut off
• Handle moves forward to avoid hitting backsplashes
• Spout swivels 360° for convenience
• Reverse osmosis certified and compatible per NSF/ANSI 58
• Solid brass construction
• Corrosion resistant ceramic disc valve
• Available finishes – Chrome, Stainless Steel, Velvet Black, Polished Nickel

–Specifications

• Supply Connection: ¼” (0.64 cm) Compression and/ or push fitting
• Required Sink Hole Diameter: 1 ⅜” – 1 ½” (3.49 cm – 3.81 cm) Standard Sink Hole
• Required Supply Pressure: 25-125 psi (172-862 kPA or 1.7-8.6 bar)
• Backsplash Clearance for Installation: Minimum 2″ (5.08 cm) required from sink hole centre to backsplash
• Counter Thickness: Maximum of 3″ (7.62 cm)
• Shipping Weight: 4.3 lb (1.95 kg)